Main Characteristics
1: Adopting back pusher , back positioning feeding , equipped with spring side lay and bottom suction system , to make our machine suitable for all kinds of paper , and keep the good characteristics of easy operation and convenient maintain .
2: The glue roller adopts high design , match with anilox to glue distributing , the uniformity of coating was improved greatly, increasing the intensity of draping , reduce the cost of customer production .
3: The steel roller through the balanced treatment and test , match the tight assembling to make higher stability . And adopting the timing belt and tooth type belt driving , make the machine running with higher precision and lower noise.
4: Adopting the liquid control system , automatic gluing , and the glue can be cycle used , avoid glue waste and labour strength .
5: Self-developed high-strength feeder with high configuration electric system make the machine running stable and lower failure rate, the electric parts adopt international wide available brand or well-known Chinese brand.
6: All material are inspected according to ISO-9001 standard and key parts as the harmonic gear and bearings are imported ones .
7: This machine bottom paper is suitable for A, B , C, D, E, F flute . It can do 3 layer, 5 layer board to sheet laminating or thick board to board laminating . The surface paper need 200-600 GSM . With top paper advance and alignment function .
model | BEST-1300A-Ⅳ | BEST-1450A-Ⅳ | BEST-1600A-Ⅳ |
Maximum siae | 1300×1100mm | 1450×1100mm | 1600×1400mm |
Minimum size | 350×350mm | 350×350mm | 450×450mm |
Laminate precision | ≤±1.5mm | ≤±1.5mm | ≤±1.5mm |
Speed | 6000 Sheets/h | 6000 Sheets/h | 6000 Sheets/h |
Total power | 12kw | 12kw | 13kw |
Length | 12.5m | 12.5m | 15m |
Total weight | 6.8T | 7.2T | 8.0T
|