Function and Characteristics:
△Roller type front feeding structure,rounds,multipoint suction feeding,high
friction,high speed,paper feeding smoothly and accurate.
△Frequency conversion of suction can adjust the wind volume,and the wind
pressure can be adjusted by the size of the paperboard,increase the thin board
and the bend board convey stability and accurately.
△The feeding paper roller adopt pneumatic type elastic feeding paper, don't destroy
the strength of corrugated board
△The machine gear are 40 cr forging, high frequency quenching treatment,
grinding;Using spray type automatic lubrication, greatly improve the operation
precision and service life.
△The die cutting rubber mat imports from CUE company in United States,it’s easy
to installation and transfer, the edge of the die cutting knife is smooth,the service
life is long,it can reach about 12 million times,greatly reduce the cost of the production.
△The die cutting rubber mat roller adopt mechanical horizontal shifter moving around 40 mm,the moving up and down of the cutting mold is
control;ed of the pneumatic device,prolong the service life of the rubber mat.
△Automatic line speed compensation,make the Youli rubber mat even wear,and equipped with rubber mat repair system,the rubber mat
can be used multiple times.
△Paper feeding side baffle and the back block box are all controlled by computer and electric.
△Roller is made of high quality steel, internal conditioning, surface grinding, hard chromium plating, and dynamic balancing correction,
smooth operation
△Die-cutting roller phase, phase adjustment adopts planetary gear type structure, PLC touch screen control and electric digital 360 degrees
of adjustment.
△Import control system,Siemens 、Schneider low-voltage electrical appliances.
Model | unit | 1200×2200/2400/2600 | 1400×2200/2400/2600 | 1600×2400/2600/2800 |
Max cardboard size | mm | 1200×2000/2200/2400 | 1400×2000/2200/2400 | 1600×2200/2400/2600 |
Min cardboard size | mm | 350×600 | 400×600 | 450×600 |
Cardboard thickness | mm | 2-8 | 2-8 | 2-8 |
Design speed | pcs/min | 160 | 160 | 160 |
Economic speed | pcs/min | 80-140 | 80-140 | 80-120 |
Max die cutting size | mm | 1200×1950/2150/2350 | 1400×1950/2150/2350 | 1600×2150/2350/2550 |
Attachment mould roller diameter | mm | ф360 | ф432 | ф487
|